Handleiding
Je bekijkt pagina 8 van 24
8 49-5001070 Rev. 0
ENGLISH
For additional troubleshooting tips, see the full owner’s manual at GEAppliances.com.
Problem Cause and Solution
Normal Performance
Inspection
The system does not restart
immediately
When the unit is stopped, it will not restart again for 3 minutes to protect the
system.
When electricity is disconnected then reconnected, the protection circuit will
be active for 3 minutes to protect the heat pump.
Noise is heard During unit operation or a sudden stop, a swishing or gurgling noise may be
heard. The first 2-3 minutes after the unit has started is when the noise could
be noticeable. This noise is generated by refrigerant flowing in the system.
During unit operation, a cracking noise may be heard. This noise is sometimes
generated by the casing expanding or shrinking due to temperature changes.
If the airflow is creating a loud noise during unit operation, the air filter may be
too dirty.
Odors The system circulates odors lingering in the airstream, such as the smell of
furniture, paint, and/or cigarettes.
Mist or steam is blowing out During COOL or DRY mode, the indoor unit may blow out mist or steam. This
is due to the sudden cooling of the indoor air.
In DRY mode, fan speed
cannot be changed
In DRY mode, when the room temperature becomes lower than the set
temperature by 2°F, the unit will run intermittently at LOW speed regardless of
SPEED setting.
Items to look for Nonresponsive unit Is there a power failure? Is the circuit breaker off? Is the fuse blown?
Poor Cooling Is the air filter dirty?
Is there anything blocking the inlet and/or outlet?
Is the temperature set correctly?
Are there any doors or windows open?
Is there any direct sunlight shining through the window during the cooling
operation?
Are there too many heat sources or too many people in the room during
cooling operation?
Error Code
AA Refrigerant leak detected and mitigation in progress. Indoor fan will remain on until refrigerant is dispersed.
Ab The refrigerant leakage concentration is reduced. For all systems, the error code will be cleared after 2 hours by a service
technician manually. If the AA is activated repeatedly, contact technical support.
Ac Refrigerant leak sensor communication error.
Ad Refrigerant leak sensor self inspection error.
AE Refrigerant leak sensor is reaching End-of-Life. Please call a service technician for replacement.
AF Refrigerant leak sensor has reached End-of-Life. Replace sensor to restore functionality.
For warranty detail please refer to installation manual.
TROUBLESHOOTING TIPS
LIMITED WARRANTY
Bekijk gratis de handleiding van Haier Tempo QS07WB2BEA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | Tempo QS07WB2BEA |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3436 MB |
