Haier QVE801DTWW handleiding
Handleiding
Je bekijkt pagina 14 van 16
14 49-7000174 Rev. 5
ENGLISH
TROUBLESHOOTING TIPS
Save time and money! Review the chart below first and you may not need to schedule service.
Problem Possible Cause What To Do
Fan/light does not
operate when switch is
turned on
A GFCI or circuit breaker is tripped, or
house fuse may be blown.
Reset GFCI, circuit breaker or replace house fuse. If
this does not fix the issue, please refer to the LIMITED
WARRANTY section.
Fan fails to circulate air
or moves air slower than
normal and/or fan is
making loud or abnormal
airflow noise
Obstructions in duct work. Make sure nothing is blocking the vent. Make sure that if
your wall or roof cap has a blade or door that it is open.
Damper flap on the product may not be
open
Make sure damper swings freely. Damper flap may flip
over and will not fully open when this happens. Adjust to
original position.
Wrong duct size used in installation. This fan requires 4” ducting to perform optimally. Using
smaller duct size will cause reduced venting. Minimize
the duct run length and number of transitions and
elbows.
Motor bearings are
making excessive or
unusual noises.
Obstruction in the motor housing or
bearing failure
Check for obstructions in the motor housing, refer to the
PRODUCT CARE section for cleaning instructions. The
motor is permanently lubricated and never needs oiling.
If the issue in not fixed, please refer to the LIMITED
WARRANTY section.
Bekijk gratis de handleiding van Haier QVE801DTWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | QVE801DTWW |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 1171 MB |