Haier HWM90-1269S2 handleiding
Handleiding
Je bekijkt pagina 13 van 20
11
Operation
Explanation of buttons
Press Power button, set the desired washing program, after setting, press Start/
Pause
button, then press Water Level button and Program button at the same time
and hold for 3 seconds, The digitron displays “CL”, the child lock will activate. All of
the buttons are locked and have no function.
Child Lock function
Water Level sserP,gninnur margorp fo ssecorp eht nI :noitcnuf kcol dlihc eht esaeleR
button and Program button at the same time and hold for more than 3 seconds.
After three beep sound, the child lock function is release.
NOTE：If you open the lid when the “Child Lock” is activated, digital tube display “E2” and
beep,you need close the lid and press the “Start/Pause” to cancel, or washing machine
will drain after 10 seconds.
Indicator display
Off
On: Indicates the program is about to run and indicates the seleced cycle and
options
Flashing: Indicates the program is running and indicates the selected cycle and
options
Page 15
During working , it displays the remained reserve
time (minute).In case of trouble, it displays the
abnormal symbol (see to page 15)
During reserve, it displays the remained reserve time (hour).
Digital tube
Press the " Power " button to switch on the power.
Under power-on mode, press it to switch off the power.
If the "Start/Pause" button is not pressed, the machine will switch off
the power automatically after 5 minutes.
"Power
" button
The function is intended for children’s safety and preventing children from
accidental
changes to washing programs.
Bekijk gratis de handleiding van Haier HWM90-1269S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWM90-1269S2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1969 MB |
