Haier HWM100-1269S2 handleiding
Handleiding
Je bekijkt pagina 7 van 20
Installation & Adjustment
5
Please install and adjust the machine according to the directions contained in this
manual.It is very important to follow these directions for the safe operation of the
machine,and to ensure your machine operates correctly.
Do not install this machine on an surface which greater than 2°. Installing machine on a
inclined surface or on unflat ground will result in unstable running.
Please adjust it by the following method:
1.Confirm it is horizontal.
2.Lift up the side of the leg slightly and twist the adjustable leg.
Balance washing machine
Install the bottom plate
Note: The distance between the washing machine
and wall should be at least 70 mm.
70
The purpose of the bottom plate is to su ppress noise
from the washing machine during
Steps:
2. Place the plate onto the bottom of the machine.
3. Use a screwdriver to tighten the screw ( in accessory
bag) securing the panel to bottom of
4. Once the screw is tight and the panel is secure, return
the washer to its standing position.
1. Lay the washer on its back, on a nonabrasive surface.
the washer.
Back
Front
Screw
Bottom plate Carpet
(HWM100-1269S2）
Back
Front
Screws
Bottom plate Carpet
(HWM80-1269S2
HWM90-1269S2)
operation.
Bekijk gratis de handleiding van Haier HWM100-1269S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWM100-1269S2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1969 MB |
