Haier HWF12PXB1 handleiding
Handleiding
Je bekijkt pagina 26 van 40
NZ AU
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 9-6).
2. Turn off water supply (Fig.9-7).
3. Open the door to prevent formation of moisture
and odours. Leave it open while not used.
Before next usage, check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leakage.
Scalding Risk! Water in the pump filter can be very hot
!Before any caution, please ensure water has cooled
down.
1. Turn off and unplug the machine (Fig. 9-8).
2. Push and open service flap (Fig.9-9).
3.
Provide a flat container to catch residual water. (Fig
9-10) There could be bigger amounts!
4. Pull the drain hose out and hold its end above the
container (Fig. 9-10).
5. Take the sealing plug out of the drain hose (Fig.
9-10).
6. After complete drainage, close drain hose (Fig.
9-11) and push it back into the machine.
7.Unscrew and remove the pump filter in
counterclockwise direction(Fig.9-12).
8. Remove contaminants and dirt (Fig.9-13).
Bekijk gratis de handleiding van Haier HWF12PXB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWF12PXB1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4928 MB |
