Handleiding
Je bekijkt pagina 20 van 36
7-hOn App
Note:
7.5 Remote Control activation
The home network must be set to 2.4 GHz; networks operating at 5 GHz are not
supported. Ensure your smartphone is connected to the same 2.4 GHz Wi-Fi
network you want to use to configure the appliance.
Note: Remote Control Expiration
You can send a command from the app up to 24 hours after Remote Control is
enabled.
1. Ensure the router is powered on and connected to the Internet.
2. Load the laundry and close the door.
3. Turn on the appliance.
4. Short press the button. The door will lock (for models with door lock).
5. Start the cycle through the app. The control panel will be disabled, except for the
"POWER" and "START/PAUSE" buttons. Only the child lock will be available during
the program.
6. Remote control can also be activated during the cycle by short pressing the
button.
1. Open the hOn app, create a new profile (or log in if you already have one).
2. The washing machine is in standby mode, while short pressing the
button until "PA Ir" appears on the display screen;
3. Tap "Add Appliance" and follow the on-screen instructions on your smartphone
to complete the setup.
4. Until "donE" displayed on for 3 sec then display "hOn" and start slow blinking ,the
connection is successful.
If the binding fails and "rE" and "trY" displayed , you can repeatedly operate to rebind.
Bekijk gratis de handleiding van Haier HWD100-BP16357GU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HWD100-BP16357GU1 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 8014 MB |
