Haier HW90-BP14929AS6 handleiding
Handleiding
Je bekijkt pagina 24 van 60
9-Installation
24
▶ Take the appliance out of the packaging.
▶ Remove all packing material including polystyrene base, keep them out of childr-
ns reach. While opening the package, water drops may be seen on plastic bag
and porthole. Thai nomal phenomenon results from water tests in the factory.
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environm-
entally friendly manner.
9.3 Dismantle the transportation bolts
The transportation bolts are designed for clamping
anti-vibration components inside the appliance du-
ring transportation to prevent inner damage.
9-1
9.2 OPTIONAL: Install noise reduction pads
1.When opening the package, you will find four
nosie reduction pads. These are used for reducing
noise(Fig.9-1).
2.Lay the washing machine down to its side, porthole
pointing upwards, bottom side towards operator.
3.Take out the noise reduction pads and remove the
double-sided adhesive protective film; paste around
the bottom; the nosie reduction pads under the
washing machine cabinet as shown in Figure 3(two
longer pads in position 1 and 3, two shorter pads in
position 2 and 4). Finally set the machine upright again.
9-4
9-5
9-3
Warm tip:
Noise reduction pad is optional,which could help to
reduce noise. Please assemble it or not according
to your own demand.
1.Remove all 4 bolts on the rear side and take out
plastic spacers(Fig.9-2)(Fig.9-3).
2.Fill left holes with blanking plugs(Fig.9-4)(Fig.9-5).
9-2
9.1 Preparation
Bekijk gratis de handleiding van Haier HW90-BP14929AS6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HW90-BP14929AS6 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8961 MB |
