Haier HW90-BP14929AS6 handleiding
Handleiding
Je bekijkt pagina 19 van 60
7-Care and cleaning
1. Turn of and unplug the machine (Fig. 7-6.1).
2. Open service flap (Fig. 7-6.2).
3. Provide a flat container to catch leach water
(Fig. 7-6.3). There could be bigger amounts!
4. Pull the drain hose out and hold its end above the
container (Fig. 7-6.3).
5. Take the sealing plug out of the drainhose (Fig.
7-6.3).
6. After complete drainage close drainhose (Fig.
7-6.4). and push it back into the machine.
7. Unscrew and remove counter clock wise the pump
8. Remove contaminants and dirt (Fig.7-6.6).
filter (Fig.7-6.5).
7-6.3
7-6.4
7-6.5
7-6.6
7
7.6 Pump filter
.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 7-5.1).
2. Turn of water supply (Fig. 7-5.2).
3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leakage.
7-5.1 7-5.2
WARNING!
Scalding Risk! Water in the pump filter can be very
hot! Before any action please ensure water has co-
oled down.
Note: Hygiene
After long periods of disuse we recommended to run programme Cotton 90℃+600rpm
with no load and small amount of detergent in washing agent compartment (1) or
special machine cleaner to remove possibly corruptive residues.
f
Clean the filter once a month and check the pump
or instanvce if the appliance:
Doesn´t d
rain the
water.
Doesn´t spin.
Cause unusual noise while running.
7-6.27-6.1
filter
19
Bekijk gratis de handleiding van Haier HW90-BP14929AS6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HW90-BP14929AS6 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8961 MB |
