Haier HW90-B145X handleiding
Handleiding
Je bekijkt pagina 23 van 64
GB
9-Troubleshooting
23
Program Cause Solution
F3
• Temperature sensor error. • Contact the After sales service.
F4
• Heating error.
• Contact the After sales service.
F7
FA
• Motor error. • Contact the After sales service.
FC1
or FC2
• Abnormal communication error.
• Contact the After sales service.
UnB
• Unbalanced load error. • .murd eht ni daol yrdnual ecnalab dna kcehC
Reduce the load.
Problem Cause Solution
Washing machine fails
to operate.
• Programme is not yet started. • Check programme and start it.
• Door is not properly closed. • Close the door properly.
• Machine has not been switched on. • Switch the machine on.
• Power failure. • Check power supply.
• Child lock is activated. • Deactivate child lock.
Washing machine
water.
• No water. • Check water tap.
• Inlet hose is kinked. • Check inlet hose.
•
•
• Water pressure is less than 0.03 MPa.
• Check water pressure.
• Door is not properly closed. • Close the door properly.
• Water supply failure. • Ensure the water supply.
Machine is draining
• Height of drain hose is below 80 cm.
• Make sure that drain hose is
properly installed.
• Drain hose end could reach into
water.
• Make sure the drain hose is not
in water.
Drainage failure. • Drain hose is blocked. • Unblock drain hose.
•
•
• Drain hose end is higher than 100 cm
above floor level.
• Make sure that drain hose is
properly installed.
Strong vibration while
spinning.
• Not all transportation bolts have
been removed.
• Remove all transportation bolts
.
• Appliance has no solid position.
• Ensure solid ground and a levelled
position.
• Machine load is not correct. • Check load weight and balance.
Operation stops
before completing
wash cycle.
• Water or electric failure. • Check power and water supply.
Operation stops for
a period of time.
• Appliance displays error code. • Consider display codes.
• Problem due to load pattern. • Reduce or adjust load.
• Programme performs soaking cycle.
• Cancel programme and restart.
9.3 Troubleshooting without display code
FC0、
Water level sensor error.• Contact the After sales service.•
Fb
• Water overflowed abnormally.
• Contact the After sales service.
Bekijk gratis de handleiding van Haier HW90-B145X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HW90-B145X |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7976 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Soort bediening | Touch |
| Kleur van het product | Wit |
| Deurscharnieren | Links |
| Ingebouwd display | Ja |
