Haier HW90-B14367TU1 handleiding
Handleiding
Je bekijkt pagina 20 van 36
7-hOn App
The home network must be set to 2.4 GHz; networks operating at 5 GHz are not
supported. Ensure your smartphone is connected to the same 2.4 GHz Wi-Fi
network you want to use to configure the appliance.
1.Open the hOn app, create a new profile (or log in if you already have one).
2.Tap "Add Appliance" and follow the on-screen instructions on your smartphone to
complete the setup.
1.Ensure the router is powered on and connected to the Internet.
2.Load the laundry and close the door.
3.Turn on the appliance.
4.Short press the Remote button. The door will lock.
5.Start the cycle through the app. The control panel will be disabled, except for the
"POWER" and "START/PAUSE" buttons. Only the child lock will be available during the
program.
6.Remote control can also be activated during the cycle by short pressing the Remote
button.
You can send a command from the app up to 24 hours after Remote Control is enabled.
1.During a cycle, you can deactivate Remote Control by short pressing the Remote
button; the cycle will continue. You can view the cycle status in the app but won’t be able
to send commands (e.g., stop/pause).
2.If safety conditions permit, the door can be opened.
3.To resume remote control through the app, make sure the door is closed, then short press
the Remote button again.
1.At the end of the cycle, the door unlocks, and Remote Control is deactivated.
2.After 2 minutes, the appliance will automatically power off.
7.5 Remote Control activation
7.6 Remote Control deactivation
7.7 End of Cycle with Remote Control
Note: Remote Control Expiration
Bekijk gratis de handleiding van Haier HW90-B14367TU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HW90-B14367TU1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7808 MB |
