Haier HW80-B16939S8 handleiding
Handleiding
Je bekijkt pagina 22 van 32
9-Troubleshooting
EN
22
9.2 Troubleshooting with display code
Problem Cause Solution
• Drainage error, water is not fully drained
within 6 minutes.
• Clean pump fi lter.
• Check drain hose installation.
• Lock error • Shut the door properly.
• Water level not reached after 12 minutes.
• Drain hose is self-syphoning.
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
• Water protective level error. • Contact the After sales service.
• Drainage error. Water is not fully drained
within 1 minute. (Refresh programme)
• Clean pump fi lter.
Check drain hose installation.
Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages..
▶ A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
▶ For the safety of the end-user, self-repair or non-professional repair is not
recommended. Please contact an after sales service.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
:
The remaining wash cycle time will be 1 hour and 25 minutes
:
The remaining wash cycle time including chosen end-time delay will be 6 hours and
30 minutes
Automatic load detection is working; only in some programmes.
The washing cycle is fi nished. The appliance shuts off automatically.
Door is closed because of high water level, high water temperature or spinning cycle.
The buzzer is deactivated
The buzzer is activated
The function keys is closed.The programme changing is invalid.
Bekijk gratis de handleiding van Haier HW80-B16939S8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HW80-B16939S8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3949 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Soort bediening | Buttons, Rotary |
| Kleur van het product | Grafiet |
| Deurscharnieren | Links |
| Ingebouwd display | Ja |
