Handleiding
Je bekijkt pagina 70 van 80
7070
Fig. 10.7c
Traverso posteriore Arresto di sicurezza
A
A
Fig. 10.7a
OVEN FITTING OUT
1. MODELS WITH SIDE WIRE RACKS:
Assembly of the side runner frames
• Slide the rear prongs of the side rack into
the holes “A” at the rear of the oven (g.
10.7a).
• Slide the front prong of the side rack into
the holes at the front of the oven (g.
10.7b).
• Slide in, on the guides, the shelf and the
tray (g. 10.7c).
The shelf must be tted so that the safety
notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be
at the back.
• To dismantle, operate in reverse order.
Fit the catalytic panel to the side rack
(some models only)
• Make sure the panels are tted correctly
(with the arrow pointing up and the rear
holes aligned with holes “A” in the back of
the oven): the cut-out in the panel must be
placed over the light in the oven (certain
models only).
• The panels must be positioned between
the inside wall of the oven and the side
rack. Once the catalytic panels are in
place, securing the side rack will also
secure the panels.
2. MODELS WITH EMBOSSED CAVITY:
• The oven shelf is provided with a security
block to prevent accidental extraction. It
must be inserted operating as per gure
10.7d.
• To remove it, operate in the reverse order.
Click
Fig. 10.7b
OPTIONAL CATALYTIC
PANEL, WITH OR WITHOUT
HOLE FOR SIDE LIGHT
(some models only)
OPTIONAL CATALYTIC
PANEL, WITH OR WITHOUT
HOLE FOR SIDE LIGHT
(some models only)
Guard rail
Stop notch
Bekijk gratis de handleiding van Haier HGM64TC1XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HGM64TC1XS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7965 MB |
