Handleiding
Je bekijkt pagina 66 van 80
6666
STAINLESS STEEL, ALUMINIUM
PARTS, PAINTED AND SILK-SCREEN
PRINTED SURFACES
Clean using an appropriate product.
Always dry thoroughly.
IMPORTANT: these parts must be cleaned
very carefully to avoid scratching and
abrasion. You are advised to use a soft
cloth and neutral soap.
Note: Continuous use may cause a
change in the glaze around the burners,
corresponding to the areas exposed to
the heat.
GAS TAPS
Do not let cleaning products come into
contact with the valves.
Periodic lubrication of the gas taps must be
carried out by specialist personnel only.
In the event of operating faults in the gas
taps, call the Service Department.
INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after rst consulting with
the manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/
cloths should not be used on the cavity
surface.
NOTE: The manufacturers of this appliance
will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity.
Fire risk! Do not store ammable
material in the oven.
ELECTRONIC PROGRAMMER
DISPLAY CLEANING
(some models only)
Clean the programmer display using a
soft cloth, warm water and neutral soap,
or a soft cloth with a liquid detergent (non-
abrasive).
When cleaning, be careful to move the
cloth in one direction only.
Then wipe the display with a damp cloth
and dry it with a soft cloth.
IMPORTANT: DO NOT use chlorine-
based or acid-based cleaning
products, abrasive products or non-
neutral detergents as they may cause
irreparable damage to the surface. DO
NOT spray cleaning liquids directly on
the programmer display.
CLEANING THE CIRCULAR WELL
ON THE FLOOR OF THE OVEN
After using the Easy Steam and Idroclean
functions, you are advised to clean and dry
the circular well on the oor of the oven.
All enamelled parts must be cleaned using
a sponge and soapy water or other suitable
non-abrasive products.
Dry with a soft cloth.
Bekijk gratis de handleiding van Haier HGM64TC1XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HGM64TC1XS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7965 MB |
