Handleiding
Je bekijkt pagina 25 van 80
2525
FEEDER CABLE SECTION
TYPE “H05RR-F” or “H05V2V2-F”
(resistance to temperatures of 90 °C).
220-240 V ac 3 x 1,5 mm
2
(*)
(*) Connection possible with plug and outlet
CONNECTION OF THE POWER SUPPLY CABLE
Important! This appliance must be connected to the electricity supply only by an
authorised person.
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
• Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (g. 3.1).
• Open the cable gland by unscrewing screw “F” (g. 3.2), unscrew the terminal screws
and remove the cable.
• Insert the feeder cable of the suitable section (as described in the next chapter) into the
cable gland.
• Connect the phase, neutral and earth wires to terminal board according to the diagrams
in g. 3.3.
• Strain the feeder cable and block it with cable clamp.
• Close and hook again the terminal board cover (check the two hooks “A” are correctly
hooked).
N.B. The earth conductor must be left about 3 cm longer than the others.
F
230 V
PE
N
L
Fig. 3.3
Fig. 3.2
220-240 V ac
F
Fig. 3.1
A
Bekijk gratis de handleiding van Haier HGM64TC1XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HGM64TC1XS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7965 MB |
