Handleiding
Je bekijkt pagina 32 van 36
EN
14.4 Appliance pairing
Note: The home network must be set to 2.4 GHz; networks operating at 5 GHz are not supported.
Ensure your smartphone is connected to the same 2.4 GHz Wi-Fi network you want to use to
con gure the appliance.
1. Open the hOn app, create a new pro le (or log in if you already have one).
2. Tap Add Appliance and follow the on-screen instructions on your smartphone to complete
the setup.
14.5 Remote Control activation
1.
Ensure the router is powered on and connected to the
Internet.
2. Load the laundry and close the door.
3. Turn on the appliance.
4. Short press the “APP Control” button.
5.
Start the cycle through the app. The control panel will be disabled, except for the POWER and
START/PAUSE buttons. Only the child lock will be available during the program.
6.
Remote control can also be activated during the cycle by short pressing the “APP Control”
button.
Note: Remote Control Expiration You can send a command from the app up to 24 hours after
Remote Control is enabled.
14.6 Remote Control deactivation
1.
During a cycle, you can deactivate Remote Control by short pressing the “APP Control” button;
the cycle will continue. You can view the cycle status in the app but wont be able to send
commands (e.g., stop/pause).
2. To resume remote control through the app, make sure the door is closed, then short press
the “APP Control” button again.
14.7 End of Cycle with Remote Control
1. At the end of the cycle, Remote Control is deactivated.
2. After 2 minutes, the appliance will automatically power o .
14 - hOn APP
Temp_UM_TD_Haier_x9_EN.indd 33Temp_UM_TD_Haier_x9_EN.indd 33 18/02/2025 15:20:2818/02/2025 15:20:28
32
14.8 Turning O� Wi‑Fi Module and Clearing Network
Credentials
To delete the saved Wi-Fi network information and turn o the
Wi-Fi module:
1. Power on the appliance.
2.
Without starting any cycle, press and hold the “APP Control”
button for 3 seconds until “rE5t” appears.
3.
Press and hold the “ ” button for another 3
seconds
donE” appears.
4.
The configuration information will be deleted. Select a
program or turn o the appliance to exit.
5.
To recon gure, remove the appliance from the hOn app and
start a new pairing procedure.
Note: Use this procedure only if you intend to sell the appliance.
Delay
until “
Bekijk gratis de handleiding van Haier HD100-D357U1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HD100-D357U1 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6235 MB |
