Handleiding
Je bekijkt pagina 28 van 36
EN
28
12 - Installation
WARNING!
If the supply cord is damaged, it must be replaced by the service agent (see warranty card) in
order to avoid a hazard!
Temp_UM_TD_Haier_x9_EN.indd 28Temp_UM_TD_Haier_x9_EN.indd 28 18/02/2025 15:20:2818/02/2025 15:20:28
12.5 Electrical connection
Before each connection check if:
X Power supply, socket and fusing are appropriate to the rating plate.
X
The power socket is earthed and no multi‑plug or extension.
X
The power plug and socket are strictly match.
X Only UK: The UK plug meets BS1363A standard.
Put the plug into the socket (Fig.
12‑3).
Level the dryer front to back (Fig. 12-
4):
• Place the gradienter on the left side.
• Adjust the front left foot (wind down).
• Repeat the above for the right foot.
Double check the dryer is balanced:
• Place the gradienter at the centre front of the dryer.
• Ensure the dryer does not rock in any direction.
• If dryer is not balanced repeat the above steps.
After levelling, the corners of the dryer cabinet should be clear of the oor and the dryer must
not rock in any direction.
12.6
not rock in any direction.
Level the dryer
It is IMPORTANT to level the dryer to ensure the machine runs e ciently with minimal noise. The
dryer should be levelled in, so it stands balanced evenly on all four feet. Ensure the dryer does
Level the dryer side to side (Fig. 12-
5):
• Place the gradienter at the centre back of the dryer.
• Adjust the rear feet until the dryer is level side to side.
• Never fully screw the feet completely from their housings.
Bekijk gratis de handleiding van Haier HD100-D357GU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HD100-D357GU1 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6235 MB |
