Handleiding
Je bekijkt pagina 26 van 36
26
Troubleshooting without display-codes
Problem Possible cause Possible solution
Tumble dryer fails
to operate.
• Poor connection to the power
supply.
• Power failure.
• No drying program is set.
• Device has not been switched on.
• The water tank is full.
• The door is not closed properly.
• Check connection to the power
supply.
• Check the power supply.
• Set a drying program.
• Switch on the device.
• Empty the water tank.
• Close the door properly.
Tumble dryer fails
to operate and the
display shows End..
• The laundry has reached the dry
level defined by the programme.
• Check the program setting is
appropriate or not.
Drying time is
too long and the
results are not
satisfactory
• The program setting is not correct.
• The filter is clogged.
• The evaporator is blocked.
• The tumble dryer is overloaded.
• The laundry is too wet.
• The vent duct is blocked.
• Make sure the program is set
correctly.
• Clean the filter screen.
• Clean the evaporator.
• Reduce the amount of laundry.
• Spin the laundry completely before
drying.
• Check and clean the vent duct.
Remaining time on
the display stops
or skips.
The remaining time will be adjusted
continuously based upon the following
factors:
• Fabric of laundry.
• Loading weight.
• Moisture degree of the laundry.
• Ambient temperature.
• The automatic adjustment is a
normal operation.
11 - Troubleshooting
Temp_UM_TD_Haier_x9_EN.indd 26Temp_UM_TD_Haier_x9_EN.indd 26 18/02/2025 15:20:2618/02/2025 15:20:26
EN
Bekijk gratis de handleiding van Haier HD100-D357GU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HD100-D357GU1 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6235 MB |
