Handleiding
Je bekijkt pagina 33 van 36
33
14 .4 Appliance Pairing
EN
14- hOn APP
Note: The home network must be set to 2.4 GHz; networks operating at 5 GHz are not
supported. Ensure your smartphone is connected to the same 2.4 GHz Wi-Fi network you
want to use to configure the appliance.
1.Open the hOn app, create a new profile (or log in if you already have one).
2.Tap "Add Appliance" and follow the on-screen instructions on your smartphone to complete
the setup.
1.Ensure the router is powered on and connected to the Internet.
2.L oad the laundry and close the door.
3.Turn on the appliance.
4.Short press the button.
5.Start the cycle through the app. The control panel will be disabled, except for the
"POWER" and "START/PAUSE" buttons. Only the child lock will be available during the program.
6.Remote control can also be activated during the cycle by short pressing the
button.
You can send a command from the app up to 24 hours after Remote Control is enabled.
1.During a cycle, you can deactivate Remote Control by short pressing the
button; the cycle will continue. You can view the cycle status in the app but won’t be able to
send commands (e.g., stop/pause).
2.To resume remote control through the app, make sure the door is closed, then short press
the button again.
1.At the end of the cycle, Remote Control is deactivated.
2.After 2 minutes, the appliance will automatically power off.
4.Press and hold the “Delay” button for another 5 seconds until “donE” appears.
14.7 End of Cycle with Remote Control
14.6 Remote Control deactivation
Note: Remote Control Expiration
14.5 Remote Control activation
L
Bekijk gratis de handleiding van Haier HD100-CQ387BU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HD100-CQ387BU1 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5840 MB |
