Handleiding
Je bekijkt pagina 26 van 36
26
Troubleshooting without display-codes
Problem Possible cause Possible solution
Tumble dryer
fails to operate.
Ũ Poor connection to the power
supply.
Ũ Power failure.
Ũ No drying program is set.
Ũ Device has not been switched
on.
Ũ The water tank is full.
Ũ The door is not closed properly.
Ũ Check connection to the pow-
er supply.
Ũ Check the power supply.
Ũ Set a drying program.
Ũ Switch on the device.
Ũ Empty the water tank.
Ũ Close the door properly.
Tumble dryer
fails to operate
and the display
shows (QG.
Ũ The laundry has reached the
GU\ OHYHO GHnjQHG E\ WKH SUR
gramme.
Ũ Check the program setting is
appropriate or not.
Drying time is
too long and
the results are
not satisfactory
Ũ The programme setting is not
correct.
Ũ 7KHnjOWHULVFORJJHG
Ũ The evaporator is blocked.
Ũ The tumble dryer is overloaded.
Ũ The laundry is too wet.
Ũ The vent duct is blocked.
Ũ Make sure the program is set
correctly.
Ũ &OHDQWKHnjOWHUVFUHHQ
Ũ Clean the evaporator.
Ũ Reduce the amount of laun-
dry.
Ũ Spin the laundry completely
before drying.
Ũ Check and clean the vent duct.
Remaining time-
on the display-
stops or skips.
The remaining time will be adjus-
ted continuously based upon the
following factors:
Ũ F abric of laundry.
Ũ /RDGLQJZHLJKW
Ũ Moisture degree of the laundry.
Ũ $PELHQWWHPSHUDWXUH
The automatic adjustment is a
normal operation.
EN
11-Troubleshooting
Bekijk gratis de handleiding van Haier HD100-CQ387BU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HD100-CQ387BU1 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5840 MB |
