Handleiding
Je bekijkt pagina 11 van 271
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone slider control ,
and the set power
screen will be displayed.
If the screen display
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
3.3.2 Finish cooking
Or turn the cooking zone off by swipe left and touch the
on active zone to stop cooking.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
Select the desired power level using the horizontal slider or
by pressing the direct buttons on the bottom part of the
display.
You can stop the cooking in two different modes:
1. Select the active zone and manually set the power
level to "0" using the horizontal slider.
2. Swipe left or right (left for left side zones, right for
right side zones) until the "x" appears and then
press on it to stop the cooking.
1 2 3 4
1. Melting
2. Keep warm
3. Simmering
4. Boiling
Turn the whole cooktop off by touching the ON/OFF
control.
11
Bekijk gratis de handleiding van Haier HAMTSJ86TFTCF/1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HAMTSJ86TFTCF/1 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 39518 MB |
