Handleiding
Je bekijkt pagina 4 van 137
3
PREPARATION
IMPORTANT: Do not apply pressure to the screen display
area which may compromise the integrity of the display.
The manufacturer's warranty does not cover user abuse or
improper installations.
ATTACHING THE STAND
IMPORTANT: The stand of the TV must be assembled prior to
usage.
1. Place TV unit face down on a soft and flat surface
(blanket, foam, cloth, etc.) to Prevent any damage to the
TV.
2. Fix the stand to the bottom of the TV with the 4 screws.
NOTE
The appearance of the product shall be in kind.
PREPARING YOUR LED TV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches (60
mm) from the wall to prevent cable interference. Before
mounting your TV on the wall, you need to remove the stand.
For your safety, please use only with a UL
listed wall mount
bracket with minimum weight of the TV without stand.
To attach a wall mount bracket to your TV:
1.
Remove the screws holding your TV to the stand.
2. Remove the stand from your TV.
3. Secure the wall mount bracket to the back of your TV
using four screws. Follow the instructions of the user
manual that came with the wall mount bracket to install.
NOTE
The wall mount bracket are not included.
4. Fix the wall mount screws (M6x1 2mm/4pcs) into the
rear side of the LEDTV, using the torque of 12kgf,cm.
TURNING ON THE TV
1.
Install the stand and place the TV on a solid surface.
NOTE
•
Ensure that the TV is placed in a position to allow free
flow of air. Do not cover the ventilation openings on
the back cover.
• To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be placed on
or in the vicinity.
• Avoid heat, direct sunlight and exposure to rain or
water. The equipment shall not be exposed to dripping
or splashing.
2.
Connect the antenna cable or cable TV cable to the ANT
IN aerial socket on the back of the TV set.
3.
Remote control:
Remove the cover of the battery compartment. Insert
2 batteries (Type AAA 1.5V).
CAUTION: Risk of fire explosion if the battery is replaced
by an incorrect type.
4. Power:
Plug the cord into a working power outlet.
5. Turn the TV on:
Press
on the remote control or POWER button on the
side control panel of the TV.
Bekijk gratis de handleiding van Haier H50S80FUX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | H50S80FUX |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 22065 MB |
