Handleiding
Je bekijkt pagina 9 van 580
EN 9
SAFETY INFORMATION
-
in general the use of adaptors, multiple sockets and extension
cables is not recommended;
-
in case of malfunction and /or poor operation, switch off the
appliance and do not tamper with it.
• ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES
THE ELECTRICAL CONNECTIONS. The power supply to which the
oven is connected must conform with the laws in force in the
country of installation. The manufacturer accepts no responsibility
for any damage caused by the failure to observe these instructions.
The oven must be connected to an electrical supply with an earthed
wall outlet or a disconnector with multiple poles, depending on
the laws in force in the country of installation. The electrical supply
should be protected with suitable fuses and the cables used must
have a transverse section that can ensure correct supply to the
oven.
• CONNECTION. The oven is supplied with a power cable that should
only be connected to an electrical supply with 220-240 Vac power
between the phases or between the phase and the neutral. Before
the oven is connected to the electrical supply, it is important to
check power voltage indicated on the gauge and the setting of the
disconnector. The grounding wire connected to the oven's earth
terminal must be connected to the earth terminal of the power
supply.
• WARNING
：
Before connecting the oven to the power supply,
ask a qualified electrician to check the continuity of the power
supply's earth terminal. The manufacturer accepts no responsibility
for any accidents or other problems caused by failure to connect
the oven to the earth terminal or by an earth connection that has
defective continuity.
• Before carrying out any work on the electrical section of the
appliance, it must be disconnected from the mains electricity
supply.
• Connection to a good ground wiring system is absolutely essential
and mandatory.
• Alterations to the domestic wiring system must only be made by a
!
Bekijk gratis de handleiding van Haier H4MWID49P6NQB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | H4MWID49P6NQB |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 96025 MB |
