Haier FlexFit 4U36MS2HDA handleiding

88 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 21 van 88
31-5000564 Rev. 4 21
ENGLISH
B Attaching Drain Elbow to Outdoor Unit
Attach the supplied drain elbow to the outdoor unit,
if required. Connect extension piping as needed (not
supplied). (see illustration)
NOTE: The drain elbow is designed with an air gap and
will not sit flush to bottom of the outdoor unit.
NOTE: 2U20EH2HDA, 3U24EH2HDA , 4U36EH2HDA,
4U36MS2HDA, & 5U42MS2HDA models will not use a
drain elbow. A 3rd party pan is needed, if condensate
management is required by code.
Step 3 - Installation of the Outdoor Unit (Cont.)
INSTALLATION INSTRUCTIONS
NOTE: Failure to follow the wiring guidelines can result
in control board damage and communication issues (E7
error code). This includes improper wire size, use of solid
core wire, midline splicing and poor terminal connections.
C. Electrical Connections for the
Outdoor Unit
WARNING
RISK OF ELECTRIC SHOCK.
Could cause injury or death.
Make sure power is off before touching wires.
NOTE: Be certain all wiring complies with local building
codes and NEC and that the supply voltage for this
system is correct.
Connect the wiring for both the power source and the
indoor wiring using a conduit cable bracket on the side
of the outdoor unit
Using a wire stripper, remove the insulation and
separate the wires.
Verify that the wiring connections match the indoor
connections wire for wire.
Ensure each wire is under the screw terminal plate and
the plate is tightened.
Ensure the 14/4 stranded wire cable is secured under
the strain relief bracket.
Verify that all connections are secured
Drain elbow
Hose

Bekijk gratis de handleiding van Haier FlexFit 4U36MS2HDA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHaier
ModelFlexFit 4U36MS2HDA
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10861 MB