Haier FlexFit 4Q36FF2BEA handleiding
Handleiding
Je bekijkt pagina 28 van 118
28 31-5001082 Rev. 2
ENGLISH
B Attaching Drain Elbow to Outdoor Unit
• Attach the supplied drain elbow to the outdoor unit,
if required. Connect extension piping as needed (not
supplied). (see illustration)
NOTE: The drain elbow is designed with an air gap and will
not sit flush to bottom of the outdoor unit.
NOTE: A 3rd party pan is needed, if condensate
management is required by code.
Step 3 - Installation of the Outdoor Unit (Cont.)
INSTALLATION INSTRUCTIONS
NOTE: Failure to follow the wiring guidelines can result
in control board damage and communication issues (E7
error code). This includes improper wire size, use of solid
core wire, midline splicing and poor terminal connections.
C. Electrical Connections for the
Outdoor Unit
WARNING
RISK OF ELECTRIC SHOCK.
Could cause injury or death.
Make sure power is off before touching wires.
NOTE: Be certain all wiring complies with local building
codes and NEC and that the supply voltage for this
system is correct.
• Connect the wiring for both the power source and the
indoor wiring using a conduit cable bracket on the side
of the outdoor unit.
• Using a wire stripper, remove the insulation and
separate the wires.
• Verify that the wiring connections match the indoor
connections wire for wire.
• Ensure each wire is under the screw terminal plate and
the plate is tightened.
• Ensure the 14/4 stranded wire cable is secured
under the strain relief bracket. If crimping on end
terminators, follow manufacturer's recommendations.
• Verify that all connections are secured.
Drain elbow
Hose
Bekijk gratis de handleiding van Haier FlexFit 4Q36FF2BEA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | FlexFit 4Q36FF2BEA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12094 MB |
