Haier BHA6SD69M6DB9-80 handleiding
Handleiding
Je bekijkt pagina 21 van 32
21
EN
Pressing the SMART DOSE button you
will be able to set the autodose function,
according to your needs.
If you want to change the factory settings,
press SMART DOSE button. Afterward,
you can choose the desired setting:
- Pressing once the SMART DOSE
button, the ONLY softener autodose will
be deselected.
- Pressing twice the SMART DOSE
button, the ONLY detergent autodose
will be deselected.
- Pressing three times the SMART
DOSE button,
both the detergent and
softener autodose
will be deselected.
- Pressing four times the SMART DOSE
button to go back to the factory settings
(both the detergent and softener
autodose are ON).
This button allows you to choose between
different options (available for some
programmes only):
- SINGLE ITEM
This option (which can be set in several
programs) optimizes the water and
energy consumption of the selected
program, maintaining the washing
performance unchanged.
SINGLE ITEM is designed for reduced
loads and lightly soiled garments, aiming
to limit the unnecessary waste.
- NIGHT & DAY
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
During the drum water retention phase,
the machine is in pause mode.
Press START to end the cycle with the
spin (which can be reduced or removed
with the specific button) and drain phase.
Thanks to electronic control, the water in
the intermediate phases is emptied
silently, making this option very useful for
washing at night.
- DRUM CLEAN
Developed to clean the washing machine
drum.
SPECIAL PROGRAMMES button
If you are not satisfied with the washing
performance results, by increasing the
water hardness LEVEL (as indicated in
the related paragraph) the SMART DOSE
system will be able to dispense a greater
quantity of detergent, guaranteeing a
better cleaning action during the
washing phase.
WARNING:
It is necessary to clean the drawer
every time it is filled or the type of
detergent and softener is changed.
The drawer MUST REMAIN CLOSED
during the entire wash cycle, otherwise
the dosing may not work properly or
water may leak.
The default setting for the autodose
system is set in the factory to carry
out both the detergent and softener
autodose.
WARNING:
The automatic dosing system can only
be used with LIQUID softeners and
detergents. IT IS FORBIDDEN to use
powder detergents or other additives.
Before using concentrated softeners,
dilute them according to the manufacturer's
instructions on the package.
Bekijk gratis de handleiding van Haier BHA6SD69M6DB9-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | BHA6SD69M6DB9-80 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3475 MB |
