Haier BHA6SD69M6DB9-80 handleiding
Handleiding
Je bekijkt pagina 18 van 32
18
To start the selected cycle with the preset
parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
Moreover, If you want to modify the
chosen programme, press the desired
options buttons, modify the default
parameters and then press START/
PAUSE button to start the cycle.
After switching on the appliance, wait a
few seconds for the programme to start
running.
PROGRAMME DURATION
When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
PROGRAMME END
When the display shows that the
programme is finished and the DOOR
LOCKED indicator light has gone out, the
door can be opened.
At the end of the cycle, switch off the
appliance by turning the selector to OFF.
PAUSING THE MACHINE
While a cycle is running, the machine can
be paused by simply pressing the
START/PAUSE button.
Press the START/PAUSE button again to
resume the programme from the cycle
phase where it left off.
CANCELLING THE SET PROGRAMME
To cancel the programme, set the
selector to the OFF position.
Wait until the DOOR LOCKED light has
gone out before opening the door.
For safety reasons, in some wash
cycle phases, the door can be opened
only if the level of the water is below
its lower edge and if the temperature
is less than 45°C. If these conditions
are met, wait for the DOOR LOCKED
light to switch off before opening the
door.
The programme selector must be
returned to the OFF position at the end
of each cycle or when starting a
subsequent wash cycle prior to the next
programme being selected and started.
Only the options compatible with the
set programme can be selected.
Close the door BEFORE selecting the
button START/PAUSE.
START/PAUSE button
If you are not satisfied with the washing
performance results, by increasing the
water hardness LEVEL (as indicated in
the related paragraph) the SMART DOSE
system will be able to dispense a greater
quantity of detergent, guaranteeing a
better cleaning action during the
washing phase.
Check the water hardness LEVEL of
your city at your water supply
company before using the SMART
DOSE function.
Bekijk gratis de handleiding van Haier BHA6SD69M6DB9-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | BHA6SD69M6DB9-80 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3475 MB |
