Handleiding
Je bekijkt pagina 8 van 180
PAGE 8
ENGLISH
Over-Temperature Heat Mode Indoor Coil
The over-temperature routine will protect the system from excessive high indoor coil temperature during heat mode
operation. The routine will initiate if the indoor coil temperature sensor reads temperatures in excess of 131F. Conditions
that cause high indoor coil temperature include indoor fan failure, dirty indoor coil and operating the system in heat mode
when outdoor air temperatures exceed operating limit. (Too warm outside)
Should this routine be initiated, the system will reduce compressor frequency until the indoor coil temperature reaches
117F. Once this is achieved, the system will return to normal operation.
Functions and Control
Base pan heater testing process and operating logic(load test, hi-pot test, megger, resistance test, etc.)
When the compressor starts in the heating mode, the following conditions will apply:
Outdoor temperature Pan Heater
>37°F(3°C) OFF
28°F(-2°C)to 34°F(1°C) OFF 20min, ON 10min
10°F(-12°C)to 25°F(-4°C) OFF 15min, ON 15min
<10°F(-12°C) ON
Model No. Spare Part No. Resistance Value
2Q20RT2BEA
0150831548C
1. 220V/180W,(Power range: 162~198W).
2. Cold state withstand voltage: 1500V/min, Hot state
withstand voltage: 1200V/min.
3. cold insulation resistance:>500MΩ, hot insulation
resistance:>50MΩ.
3Q24RT2BEA
2Q18FF2BEA
/ /3Q24FF2BEA
4Q36FF2BEA
4Q36RT2BEA
0151045703
1. 220V/180W,(Power range:162~198W).
2. Cold state withstand voltage:1500V/min,hot state
withstand voltage: 1200V/min.
3. Cold insulation resistance:>500MΩ, hot insulation
resistance:>50MΩ.
5Q42RT2BEA
Power supply: 196~254V AC
Bekijk gratis de handleiding van Haier Arctic 2Q20RT2BEA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | Arctic 2Q20RT2BEA |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 72401 MB |
