Hager UKE240480 handleiding
Handleiding
Je bekijkt pagina 49 van 61
6LE008221A
Floor installation systems
Basic manual
Page 49/61
Floor installation systems
According to DIN VDE 0298, specific values for strain relief and bend radii may not be under-
shot during the routing of heavy current cables and data cables. The standard also describes
the permitted types of fastenings of cables using clips and their strain reliefs.
Separation of different services
DIN VDE 0100-520 states that cables of different voltage classes may only be installed togeth-
er in a routing system if all the cables have protective insulation against the highest occurring
voltage. Separating webs can be used to separate the different cables, as can the guarantee of
a sufficient spacing.
Fire protection
The avoidance of fires, particularly in public buildings, is the main aim of fire protection. The
spread of fire and particularly of smoke into other fire sections must be prevented with all the
means available for a sufficiently long period of time. This provides the opportunity to take es-
cape, rescue and extinguishing measures.
Fire protection measures should be taken on duct systems connecting/crossing fire sections,
escape and rescue routes. The directives for cable systems (M)LAR system floors (M)SysBör
regulate this in more detail.
The main causes for a fire on heavy current cables are:
– Incomplete short circuits or ground faults, e.g. on mechanically or thermally damaged ca-
bles
– Incorrect electrical connections, e.g. through a loose contact
– Heat build-ups
Bekijk gratis de handleiding van Hager UKE240480, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | UKE240480 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11902 MB |
Caratteristiche Prodotto
| Kleur van het product | Zink |
| Breedte | 240 mm |
| Diepte | 1 mm |
| Hoogte | 48 mm |
| Certificering | EN50085-2-2 |
