Hager ESR2339010 handleiding
Handleiding
Je bekijkt pagina 215 van 308
213
Technical changes reserved
electraplan.VE-EE
electraplan.VE-EE
Installation instructions, pedestal box
General instructions:
Projecting
Pedestal boxes made of polyamide for installation on top of the floor.
Furnishing
The largest variant accommodates two voltages, 8 installation fields
and up to sixteen installation devices.
Remove the protective cover
The installation opening covers (AKMGBZ, to
be ordered separately) of the corresponding
trunking systems are fitted with protective
covers at the factory. These must be re-
moved directly before laying the flooring.
Cut out the installation opening Install the base
Once the flooring is laid, cut out the installa-
tion openings.
The base of the pedestal box is fixed to the
installation opening using the two bolts
M4 x 40 mm provided.
Thread in the cables
Route the cables through the installation
opening and the base.
Drill the screed Cut a hole into the trunking
Cut a hole into the screed down to the un-
derlying trunking using a carbide hole saw.
Cut a hole into the trunking using a hole saw.
Bekijk gratis de handleiding van Hager ESR2339010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | ESR2339010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 89702 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Breedte | 45 mm |
| Diepte | 40 mm |
| Duurzaamheidscertificaten | RoHS |
| Aantal | 10 |
