Hager ESR1339010 handleiding
Handleiding
Je bekijkt pagina 213 van 308
211
Technical changes reserved
electraplan.VE-EE
electraplan.VE-EE
Installation instructions, tube cable outlet
General instructions:
We recommend to protect the visible areas against damage during
construction work.
The installation instructions apply to all installation units with tube
cable outlets made of aluminium. This includes for example stain-
less-steel cassettes, heavy-duty cassettes but also service unit
VANR12.
Seal against moisture
The flooring must be flush with the top edge
of the cassette cover or outer frame. The
joint between flooring and tube mounting
set must be sealed against moisture by the
customer.
Open the tube lid Check the rubber seal
Open the lid of the tube mounting set using
pin wrench TUSS000 (to be ordered sepa-
rately).
After unscrewing the tube lid, ensure that the
rubber seal is correctly located in the tube
mounting set and does not stick to the tube
lid. The rubber seal should be lubricated with
petroleum jelly ('Vaseline') in regular intervals.
Screw in the tube cable outlet
Screw the tube cable outlet onto the tube
mounting set by hand.
Remove the cassette cover Thread in the connection cables
Remove the cassette cover upward. Thread the connection cable from above
through the tube cable outlet and plug it into
the installation device.
Bekijk gratis de handleiding van Hager ESR1339010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | ESR1339010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 89691 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Breedte | 45 mm |
| Diepte | 40 mm |
| Duurzaamheidscertificaten | RoHS |
| Aantal | 20 |
