Hager ESR1336029 handleiding
Handleiding
Je bekijkt pagina 301 van 308
299
Appendix
CE marking
Installation instructions
Low Voltage Directive
EMC Directive
Hager products meet, where relevant, the basic safety and
health requirements of the above-mentioned EU directives.
International, regional and national product standards are
taken into account.In their production and development.
This includes lEC standards, EN-Standards and DIN/VDE
standards.
For the conformity assessment, Hager declares the conformity
and identifies the products on its own authority with a CE
marking.
The CE marking is addressed to the authorities (e.g. labour
inspectorates, building authorities, customs services) of the
individual countries within the EU.
CE indicates to the authorities that the products comply with
the relevant EU directives, on the basis of which it is therefore
permitted to move the goods freely within the EU.
Ready-to-connect switchgear assemblies
comply with the EMC guidelines
When assembling, equipping and wiring low-voltage
switchgear assemblies (e.g. ready-to-connect distribution-,
meter- and transformer-enclosures) the manufacturers
instructions are to be applied, in addition to the installation
regulations already known to the electrical contractor.
Reason:
To ensure electromagnetic compatibility in the manufacture of
ready-to-connect switchgear assemblies.
In order to exclude mutual interference of installation
equipment with each other and with the immediate
environment, the following additional mounting or installation
rules must be observed.
1. General
– Firstly, only CE marked equipment is to be installed, if you
are subject to EU directives.
– In exceptional cases, additional special assembly and in-
stallation rules are to be observed with regard to EMC.
If necessary, consult the instructions sheet for the installa-
tion devices.
2. EMC environment (according to DIN EN 61439-1)
– Hager installed devices are suitable for operation in
Environment B
– When operation is intended in Environment A or in other
environments, other restrictions may apply depending on
the particular application.
Environment B: Refers to public low-voltage networks, e.g.
in residential, commercial and light industrial areas. Strong
sources of interference, such as arc welding equipment, are
not covered by this environment.
Environment A: Refers to non-public or industrial low-voltage
networks, areas and facilities, including strong interference
sources.
3. Installation and wiring
– In order to exclude mutual interference of installation
equipment with each other and with the immediate en-
vironment, the following general additional mounting or
installation rules must be observed.
3.1 Residual current protection devices
(e.g. RCD switches)
– Wiring cables directly adjacent to RCDs are to be avoided.
If this is not possible, the following rule applies:
- Directly adjacent conductors must carry operating
currents < 200 A.
- At a distance of 1 cm from the conductor to the RCD
device, operating currents must be < 300 A.
- At a distance of 2 cm from the conductor to the RCD
device, operating currents must be < 400 A.
– Installed protection switch devices with a rated switching
capacity of > 25 kA (e.g. circuit breakers) must not be in-
stalled directly next to RCD devices.
– Transformers may also not be installed directly next to
RCD devices.
3.2 Electronic component devices
(e.g. time switches, dimmers)
– Installed protection switch devices with a rated switching
capacity of > 10 kA (e.g. miniature circuit breakers) must
not be installed directly next to such devices.
– Dimmers may only control power consumptions < 1000 W.
Declaration of conformity
The accompanying declaration is found separately in your
technical documentation as proof of conformity.
Bekijk gratis de handleiding van Hager ESR1336029, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | ESR1336029 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 89748 MB |
Caratteristiche Prodotto
| Kleur van het product | Groen |
| Breedte | 45 mm |
| Diepte | 40 mm |
| Duurzaamheidscertificaten | RoHS |
| Aantal | 20 |
