Hager BKSAN065110 handleiding
Handleiding
Je bekijkt pagina 45 van 61
6LE008221A
Floor installation systems
Basic manual
Page 45/61
Floor installation systems
Standardisation and testing
Standardisation
The EN 50085 series of standards specifies the general requirements for electrical installation
duct systems. In particular, Part 2-2 describes the requirements for floor installation systems
and took effect in July 2009.
The standard is divided up into two sections:
– Erector specifications
The electrical installation engineer is usually responsible for compliance with the require-
ments described in the erector specifications.
– Device testing specifications
The device test specifications specify the testing criteria of the products/devices. The manu-
facturer of the products/device is responsible for compliance with it.
Device testing specifications
– Define the function of the product/device
– Define the load capacity of the product/device
– Define the area of use of the product/device
– Are primarily responsible for the safety of the product/device (e.g. protection against
electric shocks)
Classification of floor installation systems
EN 50085-1, as a general section for electrical installation duct systems, and EN 50085-2-2, as
a system-specific section for floor installation systems, prescribe a classification of the products.
This standardises product properties across Europe. For the first time, a standard for installa-
tion systems has also been given an optional load test for vertical loads that impact over a large
area (heavy duty).
Classification according to EN 50085-1
6.1 Based on material
6.2 Based on impact resistance
6.3 Based on temperature
6.4 Based on resistance to flame propagation
6.5 Based on electrical conductivity
6.6 Based on electrical insulating properties
6.7 Based on degrees of protection afforded by housing/casing in accordance with EN 0529:1991
6.8 Based on protection against corrosive or contaminated substances
6.9 Based on fastening type for system duct cover
6.10 Based on electrical protection separation
Classification according to EN 50085-2-2
6.101 Based on type of floor care
6.102 Based on resistance to vertical loads applied to a small area (Ø +/-13 mm)
6.103 Based on resistance to vertical loads applied to a large area (Ø +/-130 mm)
Table 13: Classification according to EN 50085
Bekijk gratis de handleiding van Hager BKSAN065110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hager |
| Model | BKSAN065110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11902 MB |
