Gys PBT 720 handleiding
Handleiding
Je bekijkt pagina 25 van 96
EN
25
User manual
DBT 710 / PBT 720
Translation of the original
instructions
Cell in poor condition Recharge - Retest
CCA :
VOL:
STD:
R:
SOH
0%
99.99
mΩ
300 A
10 A
7.89 V
BAD CELL
CCA :
VOL:
STD:
R:
SOH
4%
34.96
mΩ
400 A
86 A
11.95 V
CHARGE-RETEST
Battery cell(s) damaged or in short-circuit, replace batte-
ry as soon as possible.
Battery is not stable, recharge and retest to avoid any
possible errors. If the test result is the same after charging
and retesting, the battery should be considered defective
and must be replaced.
*When usi
ng In-Vehicle mode
, if the «Replace» message appears, this may be because the battery is not
connected correctly to the vehicle. Disconnect the battery from the vehicle and retest the battery in Out of
Veh
icle Mode before deci
ding to replace it.
Press the keys to view SOH (State of Health) or SOC (State of Charge).
CCA :
VOL:
STD:
R:
SOC
96%
4.48
mΩ
12N9-4B-1
670 A
12.54 V
BATTERY IN GOOD CONDITION
CCA :
VOL:
STD:
R:
SOH
100%
4.48
mΩ
500 A
670 A
12.54 V
BATTERY IN GOOD CONDITION
SOH (state of health of
the battery)
SOC (state of charge of
the battery)
Calculated starting
current
Battery voltage
Internal resistance
Starting current
entered [Car].
Battery reference ente-
red [Motorcycle]
Bekijk gratis de handleiding van Gys PBT 720, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | PBT 720 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16261 MB |
