Gys MI 120A handleiding
Handleiding
Je bekijkt pagina 13 van 64
13
GYSMI 100A / 120A / 160A / 200A
EN
13
TROUBLESHOOTING
Troubleshooting Causes Solutions
The 2 indicators are on, but the ma-
chine does not deliver any current.
The thermal protection has switched
on.
Wait for the end of the cooling cycle.
Current too high on the primary
circuit.
Switch o the unit (with the on/o
switch), then turn it on.
The green indicator is on, but the
machine does not weld.
Fault with earth clamp/cable connec-
tion.
Check the connections
The product is under voltage, you are
feeling tingling when touching the
machine's body.
The earth contact is faulty.
Check the plug and the earth of your
installation.
The machine welds poorly. Polarity error (+/-).
Check the polarity (+/-) recom-
mended on the electrode box.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
Bekijk gratis de handleiding van Gys MI 120A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | MI 120A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8032 MB |
