Gys flash 53.24 CNT FV handleiding
Handleiding
Je bekijkt pagina 21 van 88
21
GYSFLASH CNT
EN
21
CONFIGURATION MENU
Navigation :
1 Press the MODE button for 3 seconds to access the Conguration Menu
2 Use the arrows to scroll through the dierent parameters
3 Press the SELECT button to select the parameter or enter the submenu.
4 When a parameter is ashing, use the arrows to change its value
5 Conrm the parameter value by pressing SELECT again
Languages :
Selecting the display language.
Sound:
Turning the unit’s sound on (ON) or o (OFF).
Auto-Restart:
Enable (ON) or disable (OFF) the AUTO-RESTART function. This function automatically restarts the charger in the event of a power
failure.
Auto-Detect :
Enable (ON) or disable (OFF) the AUTO-DETECT function. This function automatically starts a charge when a battery is connected
to the charger.
Date :
Setting the date and time.
Cable calibration :
Procedure for calibrating the charging cables of the device, so that the charger optimally compensates for the voltage drop due
to the cables. It is strongly recommended to perform this procedure at least once a year and each time the charging cables are
replaced.
Calibration procedure :
1 Press SELECT to enter the CABLE CALIBRATION submenu
2 Short-circuit the clamps
Ensure that the metal parts of the jaws to which the cables are attached are in good
contact with each other.
OK NOK NOK
3 Press START/STOP to start the calibration
4
: The calibration was successful.
Err19: Cable_NOK : A problem occurred during cable calibration.
Check that the cables are in good condition and correctly short-circuited and repeat the operation.
Bekijk gratis de handleiding van Gys flash 53.24 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 53.24 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14137 MB |
