Gys flash 107.24 CNT FV handleiding
Handleiding
Je bekijkt pagina 24 van 104
24
User manual
GYSFLASH 107.24 CNT FV
Translation of the original
instructions
1 Connect the USB stick to the Gysash
2 Enter the «Export DATA» submenu.
3 Conrm that the charging data has been saved.
4
The Gysash will then copy the charging data to the USB stick in the form of a
«.CSV» le.
Cable calibration
Cable calibration
Automatic
Manual
Cables can be calibrated either automatically (recommended) or manually.
This procedure is used to calibrate the charging cables of the unit, so the Gysash can
eectively compensate for any voltage drop caused by the cables. We strongly recommend
that you carry out this procedure every time you replace your cables, or if they are getting
worn.
Automatic calibration (recommended)
Cable calibration
To calibrate, simply short-circuit the charging clamps and then conrm.
The device then automatically calculates the cable resistance.
Be sure that the metal portions of the jaws to which the cables are attached are in proper
contact with each other.
OK NOK NOK
Manual calibration (not recommended)
Cable calibration
11.5 m
The cable resistance can be set manually.
Warning: this value must include the internal resistance of the Gysash.
Bekijk gratis de handleiding van Gys flash 107.24 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 107.24 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15482 MB |
