Gymrex GR-TB 51 handleiding
Handleiding
Je bekijkt pagina 5 van 21
3
F1
F1
F
H
L
G
K
L
L
KC
L
9
a) Screw the transverse beam E to the vertical beams
A and B in a perpendicular way.
b) Make sure that the vertical beams are not placed
inverted.
c) FOR MODEL GR-TB 52: The vertical beams consist
of two parts which makes it possible to adjust the
height of the beam. Place plastic bushings in the
beam with the base at the bottom [1] and insert the
barbell support beam extension at the top [2].
d) Insert the adjustment rod D into the holes in the
vertical beams at the desired height.
e) Screw the main crossbar F to the top of the front
beam C and the middle of the crossbar E.
f) For security, screw the support beam P diagonally to
the beams F and C.
a) Align the holes in the support beams J with the holes
at the top and bottom of the backrest, then screw one
of the support beams J to the brace J1 on beam F.
b) Screw the other J-beam to the other end of the
brace. Tighten all the screws.
a) Place the seat H on the mounting brackets F1 and
screw in place.
b) Screw the foot press G to the front beam C. Make
sure that the screws are not too tight, which would
prevent the press from moving.
c) Attach the arms of the foot press K.
d) Place the L pads on the K press arms.
FOR MODEL GR-TB 52
a) Screw the mounting bracket [1] separately to the
front beam and to the seat.
FOR MODEL GR-TB 51
a) Screw the spacers M and N to the vertical beams
A and B.
b) Screw the strut arm O into the hole in the stretcher.
c) Place the L cushions on the stretcher arms.
2
1
2
J
I
J1
J
F
C
1
4
L
A
B
N
E
M
L
O
O
4
1
3
2
5
6
1
3
2
4
8
7
5
6
8
r) Keep the unit away from sources of re and heat.
s) Exceeding the maximum allowable user weight may
result in product damage.
t) Always perform a warm-up before using the
machine.
u) If you experience any alarming symptoms while
exercising, such as chest pain, dizziness, shortness of
breath, etc., stop exercising immediately and consult
your physician.
v) Place the device on a stable, dry and at surface,
taking care to keep a free space around it measuring
the width of the unfolded arms.
w) Before exercising, consult your physician to
determine your overal general health.
x) Remember that excessive exercise can lead to serious
injury, so do not overestimate your capabilities and
exercise according to the recommendations of your
trainer or doctor.
y) Before each use, visually inspect the equipment for
any damage that may aect the safety of use and to
ensure that the components are securely fastened.
1. backrest
2. backrest angle adjustment bar
3. stretchers
4. cross bar
5. seat
6. leg press
7. leg rest
8. barbell support
1. vertical beam (adjustable in height)
2. backrest angle adjustment bar
3. barbell support
4. backrest
5. seat
6. foot press
3.2. PREPARATION FOR OPERATION
POSITIONING OF THE UNIT
Always operate the unit on a level, stable, clean, reproof
and dry surface and out of the reach of children and persons
of impaired mental, sensory and intellectual functions,
keeping a free space around the device measuring the
width of the unfolded arms.
3.3. INSTALLATION OF THE UNIT
A
B
D
F
P
C
1
E
3. RULES OF USE
The workout bench is used to perform exercises on it
for dierent parts of the body and at dierent levels of
diculty.
The user is responsible for any damage resulting from
misuse.
3.1. DEVICE DESCRIPTION
GR
-
TB 51
CAUTION! Although the product has been designed
to be safe, with adequate safeguards, and despite the
additional safety features provided to the user, there
is still a slight risk of accident or injury when handling
the unit. You are advised to use caution and common
sense when using this product.
GR-TB 52
02.05.2022
Bekijk gratis de handleiding van Gymrex GR-TB 51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gymrex |
| Model | GR-TB 51 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5051 MB |
