GW Instek GPP-1323 handleiding
Handleiding
Je bekijkt pagina 64 van 157
GPP-1323/GPP-1205 User Manual
64
Point
It sets a core action for select step. The available options
are described as follows.
Point
None
Pause
It sets which step will be paused
during a sequence script. When a
sequence is paused, press Test key to
continue running the sequence.
Exit
It sets which step is the exit step of an
entire sequence script. Generally, a
sequence script can be executed again
after finishing by pressing Output
key. However, when Exit step is set,
the sequence function won’t be
executed again after finishing by
Output key directly.
RECO 0
It sets which step will be executed in
stop action for the data log function.
This relates to the RECO 1 ,RECO 2
and RECO 3 actions as the following
sections.
RECO 1
It sets which step will be executed in
the action of saving data log into USB
disk. Once a sequence script runs to
this step, data log will be kept saving
into USB disk instantly until next
RECO 0 action is met. Refer to page
60 for details.
RECO
2/RECO 3
It sets which step will be executed in
the action of sending data log to
remote control side. Once a sequence
script runs to this step, data log will
be kept sending to remote control side
until next RECO 0 action is met. Refer
to page 60 for details.
RECO 2---USB CDC,RECO 3--LAN
Trigin
It sets which step will be executed by
trig-in signal. The Trig in step will be
held until trig-in signal is received by
GPP-1000 series unit.
Bekijk gratis de handleiding van GW Instek GPP-1323, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPP-1323 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14224 MB |
