GW Instek GPP-1323 handleiding
Handleiding
Je bekijkt pagina 62 van 157
GPP-1323/GPP-1205 User Manual
62
Mode
Normal
It sets Normal Mode.
Jump
It sets Jump Mode.
Cycle
It sets cycle Mode.
INF Cycle
It indicates infinite cycles.
SEQU Start
It sets which step is the starting step of an entire
sequence script. Be aware that this Start step can only be
set equal to or earlier than the “Cycle Start”.
SEQU End
It sets which step is the end step of an entire sequence
script. Be aware that this End step can only be set equal
to or later than the “Cycle End”.
Cycle
Number
It sets how many cycles will be repeated. For example,
when a script consists of 6 steps and cycle number is set
3, the sequence runs the script, which contains step 1 to
6, for 3 times in a row.
Cycle Number
1 to 999
It sets cycle(s) from 1 to 999 times.
Cycle Start
It sets which step is the starting step of cycle. The
available steps options vary per total steps.
Cycle Start
1 to 999
It sets which step is the starting point of
cycle.
Cycle End
It sets which step is the end step of cycle. The available
steps options vary per total steps.
Cycle End
1 to 999
It sets which step is the end point of cycle.
Bekijk gratis de handleiding van GW Instek GPP-1323, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPP-1323 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14224 MB |
