GW Instek GPP-1323 handleiding
Handleiding
Je bekijkt pagina 142 van 157
GPP-1323/GPP-1205 User Manual
142
Configure Ethernet Connection
The GPP-1000 series supports both DHCP connections so the
instrument can be automatically connected to an existing network or
alternatively, network settings can be manually configured.
Ethernet
configurati
on
For details on how to configure the Ethernet settings,
please see the configuration chapter on page 102.
Parameters
MAC Address
(display only)
DHCP On/Off
IP Address
Subnet Mask
Gateway IP
Sockets Server Configuration
Configurati
on
This configuration example will configure the GPP-1000
socket server.
The following configuration settings will manually
assign the GPP-1000 an IP address and enable the
socket server. The socket server port number is fixed at
5025.
1. Connect an Ethernet cable from the network to the
rear panel Ethernet port.
2. Turn Off DHCP setting followed by setting the
relevant settings including IP Address, Subnet Mask,
Gateway IP.
3. The indicator will be shown when a remote
connection has been established.
Bekijk gratis de handleiding van GW Instek GPP-1323, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPP-1323 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14224 MB |
