GW Instek GPE-3323A handleiding
Handleiding
Je bekijkt pagina 11 van 53
OVERVIEW
11
Independent /
Series Tracking /
Parallel Tracking
The three output modes of GPE-2323A/3323A /
4323A series, independent, series tracking and
parallel tracking can be selected through pressing
the TRACKING key on the front panel.
In the independent mode, the output voltage and
current of each channel are controlled separately.
In the tracking modes, both the CH1 and CH2
outputs are automatically connected in series or
parallel. CH1 is master and CH2 is slave; no need
to connect output leads.
In the series mode, the output voltage is doubled;
In the parallel mode, the output current is
doubled.
The isolation degree, from output terminal to
chassis or from output terminal to output terminal,
is 500 V.
Constant Voltage/
Constant Current
Each output channel works in constant voltage
(CV) or constant current (CC) mode. Even at the
maximum output current, a fully rated,
continuously adjustable output voltage is
provided.
For a big load, the power supply can be used as a
CV source; while for a small load, a CC source.
When in the CV mode (independent or tracking
mode), output current (overload or short circuit)
can be controlled via the front panel. When in the
CC mode (independent mode only), the maximum
(ceiling) output voltage can be controlled via the
front panel.
Bekijk gratis de handleiding van GW Instek GPE-3323A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPE-3323A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4485 MB |
