GW Instek GPE-1326A handleiding
Handleiding
Je bekijkt pagina 29 van 53
SETUP
29
Setting Voltage Lock from Front Panel
Background /
Connection
When using the GPE series, if it is necessary to
keep the set output value unchanged to avoid
damage to the load due to misoperation, a locking
operation can be performed.
Panel operation
Press the LOCK key (for more
than 2 seconds) to lock the key
operation. At the same time, the
word " " is displayed on the
LCD.
To unlock, press the LOCK key for more than 2
seconds. The icon will then turn off.
Note
The OUTPUT key is not affected by the lock
operation.
Series parallel operation is not controlled by the
lock key.
Set the output state at startup
Background /
Connection
Through the following steps, you can set the
output state of the GPE series at its next startup.
There are two choices, ON and OFF available for
selection.
Panel operation
1. Press and hold the Output key and
turn on the power until the or
icon flashes on the LCD
display.
2. Press the “OVP” key to select.
3. Press the “ON/OFF” key to
confirm.
GPE-4323
Bekijk gratis de handleiding van GW Instek GPE-1326A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPE-1326A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4485 MB |
