Gude GWS 1600-20 handleiding
Handleiding
Je bekijkt pagina 15 van 41
11
Connect the detergent pipe (20) to the outlet (31) on
the upper part (2).
Selecting nozzles/brushes Select a suitable brush or
nozzle depending on the application:
For carpets: Fit the carpet cleaning nozzle (8) to the
end of the pipe (12).
For upholstery: Fit the upholstery cleaning nozzle (9)
to the handle (13).
Operation
Do not operate the hoover without the lter tted.
Always hold the appliance upright, especially when
vacuuming liquids.
Switching on/o and selecting the operating mode
The on/o switch (1) has three settings:
I On, vacuuming only
O O
Vacuuming and detergent spraying activated
Carpet and upholstery cleaning
Remove the dust bag (7), t the foam lter (6) and
select the appropriate nozzle (8/9).
Fill the detergent tank (16) and activate the spraying
process by pressing the spray trigger (25).
Dry and wet vacuuming
When wet vacuuming: Make sure that the switch-o
oat (24) is working and empty the container (3) as
soon as it is full.
Air ow adjustment and blowing function Use the
regulator (26) on the handle (13) to adjust the suction
ow. For the blowing function, connect the exible
hose (14) to the blowing connection (27) and switch
the appliance to „I“.
Specied Conditions Of Use
The appliance is designed for cleaning carpets as a
spray and wash vacuum cleaner. It can also be used
as a wet and dry vacuum cleaner for domestic use,
for example in the household, hobby room, car or
garage, as well as for vacuuming up water.
The following materials should not be picked
up by the vacuum cleaner
• hazardous dust
• hot materials (burning cigarettes, hot ash, etc.)
• ammable, explosive, aggressive liquids (e.g.
petrol, solvents, acids, alkalis, etc.)
• ammable, explosive dust (e.g. magnesium or
aluminium dust, etc.)
Please note that our equipment has not been
designed for commercial, craft or industrial use. If the
equipment is used in commercial, craft or industrial
operation or for similar activities, we cannot assume
any liability.
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help,state the
following pieces ofinformation: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING/CAUTION!
Warning against dangerous electric
voltage
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Unplug the machine before any work
on it.
Always keep children and unauthorised
persons out of reach of the appliance.
Never leave the appliance exposed to
adverse weather conditions (rain, sun,
fog, snow).
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
PROTECTION CLASS II
CE marking
Mains Connection
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
WARNING! Electric shock! There is a risk of an
injury caused by electric shock!
Before putting into operation, a qualied electrician
must check whether electric safety measures required
are in place. Any national regulations in this regard
must be complied with.
Electric connection to a socket.
Check the voltage. Technical data given on the type
label must correspond with electric network voltage.
It is necessary to make sure the connecting socket
was not near water and humidity and the plug was
protected against humidity.
Only use splash proof extension cables approved for
outdoor purposes.
Protect the feeder cable from excessive temperatures,
ENGLISH
EN
Bekijk gratis de handleiding van Gude GWS 1600-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gude |
| Model | GWS 1600-20 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5711 MB |
