Gude GRD 400/R handleiding
Handleiding
Je bekijkt pagina 33 van 108
33
It is strictly prohibited to disassemble,
modify and purposely remove the protective
equipment on the unit and t other protective
equipment instead.
No change can be made in respect of engine
and unit setting.
Do not adjust the appliance when the engine is
running (except for settings directly recommen-
ded by the manufacturer).
When working with this machine, do not use
spare parts other than those recommended by
us. Using spare parts not recommend by us can
result in serious injuries to persons or damage
to the machine.
Avoid any inadvertent starting of the engine.
Make sure, that the control lever is always in
‘Start’ position when you pull the starter rope.
Switch the appliance immediately o after
nishing your work.
Always operate the device with both hands
during operation. Hold the steering bar with a
rm grip.
Note that the machine can jump upwards or
forwards unexpectedly if it should encounter
buried obstacles such as large stones.
Do not overload the machine.
Run it at a safe speed and adjust it to the ave-
rage ground slope, the road conditions and the
load to be transported.
Do not race when working with the appliance.
Walk slowly and cautiously.
Pay maximum attention when turning around
and pulling the appliance to you.
Always be very careful when you cross over
or drive on dirt roads, gravel roads or country
roads. Look out for hidden hazards or trac.
Pay the greatest possible attention when
working on frozen ground, as the machine may
begin to slide in the process.
Always make sure that the weight is evenly dis-
tributed when driving on a slope, regardless of
whether you are driving forwards or backwards.
Always travel in a direction parallel to the slope
(upwards or downwards). To avoid hazards do
not shift gears whilst on a slope.
When the load is tilted from the dumper body,
the centre of gravity of the load changes
constantly and the ground conditions become a
crucial factor for the stability of the machine.
There are particular risks for track dumpers,
which operate on soft ground and have a load
e.g. clay stuck to the vehicle’s body.
If the appliance starts abnormally vibrating,
switch the engine o and search for the cause
immediately. Generally, vibrations are a warning
against operating failure.
Switch the engine o and unplug it if you are
not working with the appliance or when leaving
the appliance or adjusting, maintaining or
repairing it.
When cleaning, repairing and checking the ap-
pliance, make sure that the working screw/rotor
and all moving parts are stopped.
Oil products must not come into contact with
skin, eyes and clothing.
Operational safety instructions for snow plough
blades
Snow should be removed only after adjusting the
snow blower to the outdoor temperature when
there are extreme temperature dierences. Im-
mediate snow removing could lead to premature
wear of the drive shaft and other extensions such
as the rubber ap.
Be extremely careful when running over or
removing snow o brash entrances, footpaths
and paths. Be prepared for unexpected risks or
moving vehicles.
When you hit a foreign item, switch the engine
o, disconnect the cable from the spark plug
and check thoroughly the snow blower for any
damage and remove it if necessary – the snow
blower can be put into operation again and
worked with now.
Do not remove snow across slopes. Be extremely
careful when changing movement direction
on slopes. Never try to remove snow on steep
slopes.
Do not overload the appliance; do not try to
remove snow too quickly.
Never use the appliance at a high travelling
speed on a slippery surface. Be careful when
reversing.
The snow blower must only be used when ap-
propriate visibility or good lighting is provided.
Stand fast on the ground and hold the handle
tight by hands at all times. Walk, never run.
Transport and storage
EN
ENGLISH
Bekijk gratis de handleiding van Gude GRD 400/R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gude |
| Model | GRD 400/R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13593 MB |
