Grunkel I-DancerEasy handleiding
Handleiding
Je bekijkt pagina 39 van 64
Cleaning of other robot parts
Turn o the robot and clean the obstacle sensors using the included brush.
Periodically clean the charging pins on the robot and charge base with a so, dry cloth.
When the battery has a very low charge or has not been used for a long period of time, its
capacity will be reduced. In this case it is advisable to activate it again. Charge the robot on
the base for three minutes; repeat this process 3 times, then fully charge the robot for 5 to 6
hours.
The robot uses long life batteries. It is not necessary to replace this component frequently.
Warnings
The robot may avoid certain areas due to the complexity of the environment. For best possi-
ble performance, remove all potential obstacles from the oor before performing routine
cleanings.
Please turn off the robot first and clean the
cliff sensors by using the cleaning brush.
Keep power cords and other objects
that can cause entanglement out of the
robot's reach..
Hide the bangs in the carpets.
EN
36
Bekijk gratis de handleiding van Grunkel I-DancerEasy, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grunkel |
| Model | I-DancerEasy |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7254 MB |
