Handleiding
Je bekijkt pagina 95 van 112
EN / 95
7. Select Channel Installation Mode op-
tion, and press the .
8. Select Satellite (Standard) if you are us-
ing an operator, select Satellite (Oper-
ator Mode), and press the .
9. Select Automatic Channel Scan option,
and press the .
ð A warning message will be displayed.
10.To delete all the previously scanned
channels and scan again, select OK, and
to cancel scanning, select Cancel and
press .
ð Satellite Antenna Type menu will be
displayed.
Satellite Antenna Type
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
Single Cable II
Single Cable
11.As per the type of the single cable router
multiswitch on your antenna system, se-
lect Single Cable I or Single Cable II and
press the .
• Single Cable I: By using a single channel
router, broadcasts can be received on up
to eight different devices via the same
cable.
• Single Cable II: By using a single channel
router, broadcasts can be received on up
to thirty-two different devices via the
same cable.
12.Depending on your selection of Single
Cable I or Single Cable II 8 or 32 user
bands will be displayed in the Tuner
menu.
Note:
• Example setup is explained for eight
devices with Single Cable I.
13.Select the required options with the
/
.
ð Tuner: User band 1 ile User band 8
arasında seçim yapın.
ð Band Frequency: Select the band fre-
quency with the
/
button and press
the button.
ð User Defined: Determine the band fre-
quency yourself. From the Band Fre-
quency field, select User Defined. User
Defined option will be displayed in the
Single Cable I menu. Enter user
defined frequency with the
...
.
14.Select Next option and press the .
ð Satellite Selection menu will be dis-
played.
15.Select the first satellite displayed in the
menu and press the .
16.Select Satellite Status asOn.
17.Select Satellite Selection using the
and select the satellite you wish to use
for searching.
18.Select the Scan Mode Network or Full.
19.Select Scan Type.
ð Select Free for unencrypted channels
only
ð Select Encrypted Channels Only for en-
crypted channels only
ð Select All for all satellite channels.
20.Select Store Type.
ð Select Only Digital Channels for TV
channels only
ð Select Only Radio Channels for radio
channels only
ð Select All for scanning both options.
21.Select LNB Settings and press the .
Bekijk gratis de handleiding van Grundig TOKYO 75 GJU 7900G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | TOKYO 75 GJU 7900G |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 11031 MB |
