Handleiding
Je bekijkt pagina 93 van 120
EN / 93
Automatic Channel
Scan
Tone Burst
Single
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
14.Select Current Satellite and press the
.
15.Select Satellite Selection using the
and use the
/
to select the satellite
you wish to use for searching.
16.Select Scan Mode and use
/
to se-
lect Network or Full.
17.Select Scan Type.
ð Select Only Free Channels for unen-
crypted channels only
ð Select Encrypted Channels Only for en-
crypted channels only
ð Select All for all satellite channels.
18.Select Store Type.
ð Select Only Digital Channels for TV
channels only
ð Select Only Radio Channels for radio
channels only
ð Select All for scanning both options.
19.Press the to return to the previous
menu.
20.Select Next option and press the .
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
Note:
• If some of the frequencies are not stored
completely due the changes parameters
satellite parameters made by the broad-
caster, it is recommended to set the Scan
Mode as Network.
21.Press to return to the previous menu,
press to return to TV broadcast or
press to return to Home menu.
20.2 Manual Search for Digital Tele-
vision Channels with Single
Satellite Connection
If a certain channel cannot be found with
automatic scan, scan it by manual scan.
You must enter all parameters of the chan-
nel correctly. You can obtain the current
transponder information from Teletext
page, satellite TV magazines or internet.
If there is a direct cable connection
from your satellite antenna to the
TV set, and if there is no common
satellite antenna switchboard, you
need to search over a single cable.
1. Press the to switch to the TV mode.
2. Press the , select Source and press
the .
3. Select Satellite option, and press the
.
4. Press the , select Settings and press
the .
5. Select Channels & Inputs option, and
press .
Bekijk gratis de handleiding van Grundig MUNICH 40 GJF 6900 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | MUNICH 40 GJF 6900 B |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 11367 MB |
