Handleiding
Je bekijkt pagina 52 van 116
EN / 52
3. Press the to switch the TV set to the
standby mode.
10.8.2 Recording a Programme from
the Channel List
1. Press the to open the channel list.
2. Select a channel with the
/
and
press the to confirm.
3. Press the on the remote control.
ð Recording information will be dis-
played: Recording symbol, channel
name, programme and recording time.
ð These information will disappear after
a short while, the REC symbol and the
recording time appear in the lower left
corner of the screen.
4. Press to stop recording.
10.9 Sleep Timer
10.9.1 Adding a Record Timer Using
the Electronic Programme
Guide
Electronic programme guide data can be
used for recording.
1. Press the on the perpendicular
axis to open the electronic TV guide.
2. Select the channel you want to add a re-
cording timer with the
/
.
3. Select the programme you want to add
a recording timer with the
/
and con-
firm with the .
ð Programme List - Add menu will be
displayed.
4. From the Programme Type item, select
Save.
5. From the Repeat Type item, select
(Once, Week or Every Day).
Note:
• To add a recording timer for a pro-
gramme at a time interval other than the
broadcast time specified in the electronic
programme guide, select the Event
Model item, and then select Timing
Schedule.
6. To save the settings, press the
(green).
7. Press to return to the broadcast.
Notes:
• A warning is displayed before the timer
recording starts and counts down for 15
seconds to allow you to switch to the
channel. At the end of 15 seconds, the
channel to be recorded appears automat-
ically.
• If the timer recording starts during play-
back, playback stops. If you do not select
Yes option in the warning prompt, re-
cording will start automatically at the end
of the countdown.
• Only for UPC customers Note: Parts of
previous or next files can be included into
the record while the programme is being
recorded resulting from possible Pro-
gramme Guide errors. In such cases,
keep in mind that the highest family pro-
tection level will apply for the whole re-
cording if one or more of those pro-
grammes have any level of family protec-
tion.
10.9.2 Adding a Record Timer By
Entering the Information
Manually
1. Press the to switch to the TV
mode.
2. Use the and then the to select the
Save tab.
3. Use the to select Programme List
and press the .
4. Info menu will be displayed. Use the
to select Add and confirm with the .
Note:
• If there is a previously programmed
timer, the Schedule List menu is dis-
played without the Info menu being dis-
played. Press the (yellow) to add a
timer in this case.
Bekijk gratis de handleiding van Grundig 55 GOB 9490 Singapur, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | 55 GOB 9490 Singapur |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 10208 MB |
