Handleiding
Je bekijkt pagina 95 van 118
95
ENGLISH
DETAILED CHANNEL SETTINGS -------------------------------
Band Frequency
Press »
«, select the band frequency with
»
V
«, »
Λ
« and confirm with »
«.
User Defined
»Band frequency« is active when »User
Defined« is selected.
Enter the user defined frequency with
»1...0«, select the »
« on the screen
keyboard and confirm with »
«.
11 Use »
V
« or »
Λ
« to select »Next« and
confirm with the »
«.
– Automatic Channel Scan menu shall be
displayed.
12 Select the first satellite displayed in the
menu with »
V
« or »
Λ
« and confirm with
»
«.
13 Select »Satellite Status« as »On« with »
<
«,
»
>
«.
14 Confirm »Satellite Selection« by pressing
»
«, and press »
V
« or »
Λ
« to select the
satellite you want to scan.
15 Select »Scan Mode« with »
V
« or »
Λ
« and
select »Full« or »Network« with »
<
«, »
>
«.
16 Select »Scan Type« with »
V
« or »
Λ
«.
Press »
<
«, »
>
« to select »Free Channels
Only« for free channels only, »Encrypted
Channels Only« for encrypted channels or
»All« for all satellite channels.
17 Select »Store Type« with »
V
« or »
Λ
«.
Press »
<
«, »
>
« to select »Digital Channels
Only« for television channels only, »Radio
Channels Only« for radio channels or »All«
for searching both.
18 Use »
V
« or »
Λ
« to select »LNB Settings«
and confirm with »
«.
19 Use »
V
« or »
Λ
« to select »Location« and
confirm with »
«.
Press »
V
« or »
Λ
« to select the location
corresponding to the satellite you want to
scan and confirm with »
«.
20 Press »
r
« twice to return to »Automatic
Channel Scan«.
Note:
7
Make the settings described in steps 12 to
19 for each satellite you want to scan.
21 Select »Next« with »
V
« or »
Λ
« and press
»
« to confirm.
– »Automatic Scan« menu shall be
displayed and the scan for TV stations will
start.
– Scanning may take several minutes
depending on the number of television
stations received.
Notes:
7
Use set-up equipment supported/suggested
by your SCR Switch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency are changed
during installation.
7
User band and User band frequency are
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
7
With SCR satellite system, auto scan by
several users / receivers at the same time
may cause problems.
22 Press »
p
« to return to the home menu.
Bekijk gratis de handleiding van Grundig 50 GUB 6300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | 50 GUB 6300 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 12386 MB |
