Handleiding
Je bekijkt pagina 92 van 122
ENGLISH
92
DETAILED CHANNEL SETTINGS -------------------------------
12 Use »
V
« or »
Λ
« to select »Current
Satellite« and confirm with »
«.
13 Confirm »Satellite Selection« by pressing
»
«, and press »
V
« or »
Λ
« to select the
satellite you want to scan.
14 Select »Scan Type« with »
V
« or »
Λ
«.
Press »
<
«, »
>
« to select »Free Channels
Only« for free channels only, »Encrypted
Channels Only« for encrypted channels or
»All« for all satellite channels.
15 Select »Store Type« with »
V
« or »
Λ
«.
Press »
<
«, »
>
« to select »Digital Channels
Only« for television channels only, »Radio
Channels Only« for radio channels or »All«
for searching both.
16 Press »
r
« to return to the previous menu.
17 Select »Next« with »
V
« or »
Λ
« and press
»
« to confirm.
– »Automatic Scan« menu shall be
displayed and the scan for TV stations will
start.
– Scanning may take several minutes
depending on the number of television
stations received.
Note:
7
If some of the frequencies are not stored
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Scan Mode« as
»Network«.
18 Press »
r
« to return to the previous menu,
press »
H
« to return to TV broadcast or
press »
p
« to return to Home menu.
Manual search for single
satellite connected digital
television stations
If a certain channel cannot be found with
automatic scan, you can scan it manually
by manual scan function. You must enter all
parameters of the channel correctly. You can
obtain the current transponder information from
Teletext page, satellite TV magazines or internet.
Important:
7
If there is a direct cable connection from
your satellite antenna to the TV, if there is no
common satellite antenna switchboard, you
need to search for a single cable.
1 Press »
H
« to return to the TV mode.
2 Select »Source« with »
q
« and confirm with
»
«.
3 Select »satellite« and confirm with »
«.
4 Press »
q
« and select »Settings« with »
>
«
and confirm with »
«.
5 Select »Channel« with »
V
« and confirm
with »
«.
– Channel menu shall be displayed.
6 Select »Channel Set-up Mode« with »
V
«
and confirm with »
«.
7 Use »
V
« or »
Λ
« to select »Satellite
(Standard)« and confirm with »
«.
8 Use »
V
« or »
Λ
« to select »Channels« and
confirm with the »
«.
– Channels menu shall be displayed.
9 Use »
V
« or »
Λ
« to select »Manual
Channel search« and confirm with »
«.
10 Confirm »Current Satellite« with »
«.
– Manual Channel Scan menu shall be
displayed.
Bekijk gratis de handleiding van Grundig 32GHH6500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Grundig |
| Model | 32GHH6500 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 12997 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Kinderslot | Ja |
| Bluetooth | Ja |
| Beeldschermdiagonaal | 32 " |
| Resolutie | 1366 x 768 Pixels |
